 Last additions - Wings |
Top and bottom pieces.322 viewsDec 22, 2010
|
|
As you can see it didn't take much to make the curve.353 viewsDec 22, 2010
|
|
... while at the same time rotating it up to make the curve.388 viewsDec 22, 2010
|
|
I would draw the cap strip toward me across the sand paper... 328 viewsDec 22, 2010
|
|
I used a piece of 100 grit sand paper to shape the end. Ten or twelve passes was all it took.387 viewsDec 22, 2010
|
|
Same thing for the bottom piece.321 viewsDec 22, 2010
|
|
I used the nose piece as a template to mark the curve that goes on the end of the cap strip.354 viewsDec 22, 2010
|
|
Preparing the top & bottom cap strip for a rib.414 viewsDec 22, 2010
|
|
350 viewsDec 22, 2010
|
|
My jig for cutting the notch is a scrap piece of wood I ripped on the table saw with the fence set for 1/16.380 viewsDec 22, 2010
|
|
Running the putty knife across the acrylic made it easy to clean off the old glue and get ready for the next rib.377 viewsDec 22, 2010
|
|
There was often glue residue to be cleaned up afterwards.399 viewsDec 22, 2010
|
|
| 184 files on 16 page(s) |
 |
|
|
|
|
8 | |
|
|
|
|
