 Last additions |
Gluing side 2 of an aileron rib 384 viewsDec 22, 2010
|
|
Gluing the aileron rib402 viewsDec 22, 2010
|
|
Gluing the aileron rib383 viewsDec 22, 2010
|
|
Aileron rib in the jig and a second aileron rib ready for gluing on side 2403 viewsDec 22, 2010
|
|
Aileron rib in the jig473 viewsDec 22, 2010
|
|
Trimming excess gusset material on the router397 viewsDec 22, 2010
|
|
367 viewsDec 22, 2010
|
|
Close up of the clamps. Note the acrylic squares used to spread out the clamping force and also keep the clamps from getting stuck to the rib 384 viewsDec 22, 2010
|
|
Glueing and clamping a rib337 viewsDec 22, 2010
|
|
Two ribs in process. One in the jig (on the chair) and the other having "side 2" glued (on the bench)394 viewsDec 22, 2010
|
|
I cut another rib-shaped piece of 3/4 plywood and screwed down a piece of acrylic.411 viewsDec 22, 2010
|
|
This is the jig I built for "side 2" of the ribs. I needed a non-stick surface to glue on. 423 viewsDec 22, 2010
|
|
| 333 files on 28 page(s) |
 |
|
|
|
|
22 | |
|
|
|
|
