 Last additions |
Cutting the notch on the router.373 viewsDec 22, 2010
|
|
Cutting the notch on the router.366 viewsDec 22, 2010
|
|
Top & bottom cap strip marked for 1/16 notch.331 viewsDec 22, 2010
|
|
Same thing for the bottom.310 viewsDec 22, 2010
|
|
Next I marked the location where the 1/16 notch should end.464 viewsDec 22, 2010
|
|
Top and bottom pieces.322 viewsDec 22, 2010
|
|
As you can see it didn't take much to make the curve.353 viewsDec 22, 2010
|
|
... while at the same time rotating it up to make the curve.388 viewsDec 22, 2010
|
|
I would draw the cap strip toward me across the sand paper... 329 viewsDec 22, 2010
|
|
I used a piece of 100 grit sand paper to shape the end. Ten or twelve passes was all it took.388 viewsDec 22, 2010
|
|
Same thing for the bottom piece.321 viewsDec 22, 2010
|
|
I used the nose piece as a template to mark the curve that goes on the end of the cap strip.355 viewsDec 22, 2010
|
|
| 333 files on 28 page(s) |
 |
|
|
|
|
20 | |
|
|
|
|
