 Last additions - Rib Construction |
Two ribs in process. One in the jig (on the chair) and the other having "side 2" glued (on the bench)345 viewsDec 22, 2010
|
|
I cut another rib-shaped piece of 3/4 plywood and screwed down a piece of acrylic.360 viewsDec 22, 2010
|
|
This is the jig I built for "side 2" of the ribs. I needed a non-stick surface to glue on. 366 viewsDec 22, 2010
|
|
Epoxy test434 viewsDec 22, 2010
|
|
446 viewsDec 22, 2010
|
|
Close up of same rib421 viewsDec 22, 2010
|
|
First rib after flush trimming the excess gusset material on the router 397 viewsDec 22, 2010
|
|
Back side of same rib383 viewsDec 22, 2010
|
|
First rib removed from the jig - prior to trimming the excess gusset material 497 viewsDec 22, 2010
|
|
First rib glued and fully clamped449 viewsDec 22, 2010
|
|
First rib glued and fully clamped422 viewsDec 22, 2010
|
|
Clamping the first rib393 viewsDec 22, 2010
|
|
|
|
