 Last additions - Rib Jigs |
After it dries (I leave it in the form overnight) you can see it now has taken on the curvature of the form.409 viewsDec 22, 2010
|
|
Capstrip sandwiched in the form336 viewsDec 22, 2010
|
|
The capstrip is sandwiched between the two pieces of the form.317 viewsDec 22, 2010
|
|
After steaming, the capstrip is clamped in a form.315 viewsDec 22, 2010
|
|
The PVC wants to arc up about 1-2 inches as it heats up. While wearing glove you can push it back down flat. Once the PVC is heated the entire length it will stay flat.272 viewsDec 22, 2010
|
|
OK, let's try this again. Note 2x4 support.291 viewsDec 22, 2010
|
|
With all apologies to the folks in Switzerland... RICOLA!310 viewsDec 22, 2010
|
|
Ok. Now what am I going to do with this?275 viewsDec 22, 2010
|
|
Hmmm... methinks it needs more support.325 viewsDec 22, 2010
|
|
First test steam. Rags are in the ends of the tube to help contain the steam, but allow some venting329 viewsDec 22, 2010
|
|
Hot plate, tea kettle, and PVC328 viewsDec 22, 2010
|
|
Note steam venting from the end493 viewsDec 22, 2010
|
|
| 43 files on 4 page(s) |
2 |  |
|
